The best 3D printed Star Wars blaster prop for cosplay depends on your budget, your build skill, and which character you're going for. If you want the easiest first build, the push-fit DL-44 (from £32.99) needs no glue and goes together in an afternoon. If you want the single most recognisable blaster in the galaxy, the E-11 Stormtrooper blaster is a push-fit classic. If you want the biggest display piece in the room, the EE-3 Boba Fett blaster assembles to 79cm. If you're building a Din Djarin cosplay, the IB-94 Mandalorian blaster is made for exactly that. Below, all seven 3D printed Star Wars blaster props from 3DCre8Design are compared on price, build method, size and who each one suits, so you can pick the right kit before your next convention.
In this article
- What to look for in a 3D printed blaster prop
- The 7 best 3D printed Star Wars blaster props, compared
- Push-fit or glue assembly: which should you choose?
- Will a 3D printed blaster get through convention security?
- Getting your blaster built in time for a con
- FAQ
What should you look for in a 3D printed Star Wars blaster prop?
Before comparing individual kits, it helps to know what actually varies between them:
- Build method. Some kits push-fit together with printed plastic screws and need no glue at all. Others use a peg-and-slot system and are assembled with super glue (not included) for a stronger, permanent joint.
- Assembled size. These range from a 33cm sidearm to a 79cm two-handed carbine. Size affects both display impact and how easy the prop is to carry around a busy convention hall.
- Material and finish. All the kits below are 3D printed in PLA or PLA+ filament, made to order in the UK. Most arrive with a smooth, paint-ready finish so you can leave them as-is or detail and weather them yourself.
- Lead time. Because every kit is made to order rather than kept as pre-built stock, current listings show a 3 to 5 working day dispatch window before your normal delivery time on top. Build that into your countdown to a con.
The 7 best 3D printed Star Wars blaster props, compared
Here's how the full range stacks up on price, build type and assembled size:
| Blaster | Character | Price | Build method | Assembled size | Best for |
|---|---|---|---|---|---|
| DL-44 | Han Solo | £32.99 | Push-fit, no glue | 33cm (13in) | First-time builders |
| IB-94 | Din Djarin (Mandalorian) | £35.99 | Peg-and-slot, glue | 37cm | Mandalorian cosplay |
| Blurrg-1120 | Hera Syndulla | £38.99 | Glue assembly | Holdout pistol size | Star Wars Rebels fans |
| EE-3 | Boba Fett | £43.99 | Push-fit, no glue | 79cm (31in) | Biggest statement piece |
| E-11 | Stormtrooper | £45.00 | Push-fit, no glue | 48cm (19in) | Most recognisable blaster, classic Stormtrooper cosplay |
| MW-20 Bryar | Bryar-style pistol | £45.99 | Peg-and-slot, glue | 30cm x 16cm | Screen-accurate detail, rotating ammo cartridge |
| EE-4 | Sana Starros | £80.00 | Advanced glue build, most parts | Two-handed carbine | Experienced builders, serious collectors |
Prices shown are current at time of writing and read live from the store. Check the product page for the latest price and colour options before you buy.
Push-fit, no glue, no mess. 33cm assembled with an actuating trigger. If you can follow a diagram, you can build this in an afternoon.
Push-fit, no glue, assembled with pegs, dowels and screws. 48cm assembled with an actuating trigger and extendable stock. The blaster every Stormtrooper, and every Rebel who's disarmed one, carries.
A 37cm Din Djarin-style blaster with peg-and-slot assembly, packaged in its own display box with parts bagged and labelled.
The largest blaster in the range at 79cm assembled. Push-fit, no glue needed, with printed plastic screws for a solid build.
Comes with a manually rotating double ammo cartridge and its own display stand. Printed in grey as standard, ready for painting.
Two more sit at the ends of the range. The Blurrg-1120 (£38.99) is a compact holdout blaster for Star Wars Rebels fans, glue-assembled with a fitting schematic. The EE-4 (£80.00) is the most advanced build in the catalogue: a two-handed carbine rifle with the most parts of any kit, finished in a glitter silver and black filament for a metallic look, and better suited to builders who've assembled a glue kit before.
Push-fit or glue assembly: which should you choose?
The seven kits split into two build methods, and the right one depends on your experience and what you want from the finished prop.
Push-fit kits (DL-44, EE-3, E-11) use printed plastic screws, pegs and dowels instead of glue. Parts test-fit together, so there's no drying time, no mess, and nothing to go wrong if you take your time. This is the better starting point if it's your first build, or if you'd rather not deal with glue at all.
Glue-assembly kits (IB-94, Blurrg-1120, MW-20 Bryar, EE-4) use a peg-and-slot system, bonded with super glue (not included). These joints are permanent and generally stronger, which matters more on larger or more detailed builds, and on kits with more individual parts to align, like the EE-4. Every glue kit ships with parts bagged, labelled, and a printed schematic to build from.
If you're new to model kits generally, our separate guide on building your first push-fit model kit walks through the tools and technique in more depth.
Will a 3D printed blaster prop get through convention security?
Rules vary by event and can change, so always check the specific convention's current policy before you travel. As one working example, MCM Comic Con London's costume, weapons and props policy permits sci-fi blasters, phasers and plasma guns up to 150cm, provided they're checked and marked by security at the show each day you bring them. Airsoft guns, gel blasters, BB guns, deactivated guns, paintball guns and metal gun props are not permitted, whatever they're based on. All seven of the props above are 3D printed plastic, non-functional, and well within that size limit, but the prop check at the door is still worth building into your morning.
MCM London runs 23 to 25 October 2026 at ExCeL, giving you a clear runway from today to build, paint and prop-check a kit if that's your target event.
Getting your blaster built in time for a con
Work backwards from your event date:
- Order. Every kit is made to order, with current listings showing 3 to 5 working days before dispatch, plus normal UK delivery on top.
- Build. Push-fit kits (DL-44, EE-3, E-11) can go together in an afternoon. Glue kits (IB-94, Blurrg-1120, MW-20, EE-4) take longer, especially the EE-4 with its higher part count, so allow a full weekend.
- Paint and detail (optional). All kits arrive with a smooth, paint-ready finish. Budget extra drying time between coats if you're weathering or adding metallic detail.
- Prop check. Arrive with time to spare on the day to get your blaster marked at security before heading into the show floor.
For a con landing in late October, like MCM London, ordering by early October comfortably covers dispatch, build and paint time with room to spare.
Frequently asked questions
Are these official Star Wars products?
No. These are fan-made props inspired by the films and shows, designed and 3D printed independently. They aren't licensed by or affiliated with Lucasfilm or Disney, and they're sold as display and cosplay props, not exact replicas of any specific screen-used prop.
What material are the blasters 3D printed in?
PLA or PLA+ filament, printed on FDM 3D printers and made to order in the UK.
Do I need to paint the blaster myself?
No. Every kit arrives with a smooth, display-ready finish in colours such as Galaxy Black, Matte Black or Grey. The same finish is also paint-ready if you want to weather it or add further detail.
How long does delivery take?
Each blaster is made to order rather than kept in finished stock. Current listings show a 3 to 5 working day dispatch window, with your normal UK delivery time on top of that.
Push-fit or glue: which is easier for a first build?
Push-fit kits (the DL-44, EE-3 and E-11) need no glue and are the more forgiving starting point. Glue-assembly kits (IB-94, Blurrg-1120, MW-20 Bryar, EE-4) need super glue, which isn't included, and give a stronger, permanent joint that suits larger or more detailed builds.
Can I take a 3D printed blaster prop to MCM London Comic Con?
Sci-fi blasters up to 150cm are permitted and get checked and marked by security each day, per MCM's published costume, weapons and props rules. Metal, airsoft, gel-blaster-based and deactivated props are not permitted. Always check the current policy for your specific event before travelling.
Ready to build your Star Wars cosplay prop?
Browse the full range of 3D printed blasters, model kits and cosplay accessories, made to order in the UK.
Shop Cosplay Props & Accessories →Prices correct at time of writing. Check each product page for current pricing and colour options.