You do not need to own a 3D printer to get a screen-accurate Star Wars blaster for cosplay. Kits like the DL-44 and EE-3 arrive already printed in the UK, ready to assemble by hand: some push together with no glue at all, others use small pegs and superglue for extra detail. Prices for the six kits compared below run from £24.99 to £80, so the right one depends on your budget, the size you want on the wall, and how much of a "build" you're after. This guide compares assembly method, size, price and character across all six, explains push-fit versus glue kits, and covers whether you're actually allowed to carry one into a UK convention.
Do you need a 3D printer for a Star Wars blaster prop?
No. A lot of 3D printing content focuses on downloading an STL file and printing it yourself, which means owning a printer, sourcing filament, and troubleshooting failed prints before you've even started assembling. The alternative is buying a kit that's already been printed for you. 3DCre8Design prints each blaster to order in the UK and ships the finished parts, so your first job is assembly, not printing. Most kits dispatch in 3 to 5 business days.
Push-fit vs glue-together: which assembly style should you pick?
The six kits split into two build styles, and it's worth knowing the difference before you order.
Push-fit kits (the DL-44 and EE-3) use printed plastic pegs and screws instead of glue. Parts click together, there's no mess, and no drying time, which makes them the better choice if you're building the night before a con or assembling with kids. You can still paint them afterwards.
Glue kits (the MW-20 Bryar, IB-94 Mandalorian, Blurrg-1120 and EE-4) come with parts bagged, labelled and matched to a printed schematic, but you'll need your own superglue to finish the build. In exchange, they tend to offer finer detail, such as the MW-20's manually rotating ammo cartridge, and painting each part before final assembly gives a cleaner finish if you're going for a screen-accurate paint job.
6 Star Wars blaster cosplay kits compared
| Blaster | Character | Assembly | Length | Price | Best for |
|---|---|---|---|---|---|
| DL-44 | Han Solo | Push-fit, no glue | 33 cm (13") | £26.99 | First-time builders, quick assembly |
| EE-3 | Boba Fett | Push-fit, no glue | 79 cm (31") | £43.99 | A big, statement display piece |
| MW-20 Bryar | Generic Rebel / Bounty Hunter | Pegs + glue | 30 cm | £24.99 | Detail painters, has a working rotating cartridge |
| IB-94 | Din Djarin (The Mandalorian) | Peg-and-slot + glue | 37 cm | £35.99 | Mandalorian fans wanting screen accuracy |
| Blurrg-1120 | Hera Syndulla | Glue | Compact holdout size | £38.99 | Rebels fans, comes boxed with artwork |
| EE-4 | Sana Starros | Glue, advanced multi-part build | Two-handed carbine | £80.00 | Experienced builders wanting the most detailed rifle |
Prices are correct at time of writing and pulled live from the 3DCre8Design catalogue. They may change if the store reprices any of these kits.
Featured builds
Push-fit, no glue, actuating trigger, includes a display stand and colour-matched orange blast tip. If you've never built a prop kit before, start here.
The biggest kit on this list at 79cm assembled, still push-fit with no glue needed. A strong centrepiece for a display shelf or a full Boba Fett cosplay.
Peg-and-slot construction for accurate alignment, 37cm assembled, packaged in a custom display box. Built for Din Djarin fans who want an accurate replica to paint and detail.
The most affordable kit here, and the only one with a manually rotating double ammo cartridge. Printed in parts specifically so you can paint before final assembly.
The Blurrg-1120 and EE-4 aren't pictured above but round out the range: the Blurrg-1120 is a compact holdout blaster tied to Hera Syndulla and arrives boxed with artwork, while the EE-4 is the most involved build on the list, a two-handed carbine finished in a glitter silver-and-black filament for a metallic look.
Is it legal to wear a blaster prop at a UK convention?
Generally yes, but every event sets its own rules, and it's worth checking before you travel. UK conventions like MCM Comic Con require every prop weapon to be checked and tagged by security at the entrance, and anything that looks like a real, unmodified firearm (rather than a clearly stylised sci-fi replica) can be confiscated. UK Games Expo takes a similar line: replica blasters are allowed provided they're clearly props and not modified BB guns. None of the kits above are functional. They're solid PLA display pieces with no moving firing mechanism, which is exactly the kind of prop these policies are built around, but you should still read the specific costume and weapons policy for whichever convention you're attending. MCM's costume, weapons and props rules and UK Games Expo's cosplay and reenactors policy are good starting points.
How to paint and finish a 3D printed blaster kit
All six kits ship in a clean print finish, ready to paint if you want to take them further:
- Sand visible layer lines with 200 to 400 grit sandpaper, then finish with 600 to 1000 grit for a smooth surface.
- Prime with a plastic-safe spray primer in light, even coats, holding the can 6 to 8 inches away.
- Paint in thin acrylic or acrylic-spray coats, letting each one dry for 10 to 15 minutes before the next.
- Weather with a dry-brush and a darker wash in recessed detail once the base coat has fully cured.
For a fuller walkthrough of priming and finishing techniques, Creality's guide to painting 3D prints is a solid reference.
Frequently asked questions
Do I need a 3D printer to get a Star Wars blaster cosplay prop?
No. Kits from 3DCre8Design are printed to order in the UK and shipped to you already printed; you only need to assemble (and optionally paint) them.
What's the difference between a push-fit and a glue-together blaster kit?
Push-fit kits like the DL-44 and EE-3 use printed pegs and screws so no adhesive is needed. Glue kits like the MW-20, IB-94, Blurrg-1120 and EE-4 use superglue (not included) with bagged, labelled parts and a build schematic, generally for finer detail.
Is it legal to carry a blaster prop at a UK convention?
Generally yes for clearly non-functional display props, but every event sets its own weapons policy and most require security to check and tag props at the door. Always check the specific convention's rules before you travel.
How long does it take to build and paint one of these kits?
Assembly alone typically takes an afternoon. Add a day or two if you're sanding, priming and painting, since paint and primer need drying time between coats.
Which kit is best for a first-time cosplayer?
The DL-44 is the easiest starting point: push-fit, no glue, and display-ready straight out of the box if you don't want to paint it at all.
Can I get a custom colour on these kits?
Yes, most listings support a custom colour request via a checkout note or the Contact Us page, at no extra charge on push-fit kits like the EE-3.
Ready to build one?
Browse the full Prop Gun & Blaster Kits collection for all six blasters above plus the rest of the range.
Shop Prop Gun & Blaster Kits →Every kit is made to order and printed fresh in the UK, dispatching in 3 to 5 business days with tracking.